How timely! My teardown of Linksys’ VLP01 router, submitted in late September, was published one day prior to when I started working on this write-up in late October.

What’s the significance, aside from the chronological cadence? Well, at the end of that earlier piece, I wrote:

There’s another surprise waiting in the wings, but I’ll save that for another teardown another (near-future, I promise) day.

That day is today. And if you’ve already read my earlier piece (which you have, right?), you know that I actually spent the first few hundred words of it talking about a different Linksys router, the LN1301, also known as the MX4300:

I bought a bunch of ‘em on closeout from Woot (yep, the same place that the refurbished VLP01 two-pack came from), and I even asked my wife to pick up one too, with the following rationale:

That’ll give me plenty of units for both my current four-node mesh topology and as-needed spares…and eventually I may decide to throw caution to the wind and redirect one of the spares to a (presumed destructive) teardown, too.

Last month’s bigger brother

Hold that thought. Today’s teardown victim was another refurbished Linksys router two-pack from Woot, purchased a few months later, this February to be exact. Woot promotion-titled the product page as a “Linksys AX4200 Velop Mesh Wi-Fi 6 System”, and the specs further indicated that it was a “Linksys MX8400-RM2 AX4200 Velop Mesh Wi-Fi 6 Router System 2-Pack”. It cost me $19.99 plus tax (with free shipping) after another $5 promotion-code discount, and I figured that, as with the two-VLP01 kit, I’d tear down one of the two routers for your enjoyment and hold onto the other for use as a mesh node. Here’s its stock image on Woot’s website:

Looks kinda like the MX4300, doesn’t it? I admittedly didn’t initially notice the physical similarity, in part because of the MX8400 product name replicated on the outer box label:

When I started working on the sticker holding the lid in place, I noticed a corner of a piece of literature sticking out, which turned out to be the warranty brochure. Nice packing job, Linksys!

Lifting the lid:

You’ll find both routers inside, along with two Ethernet cable strands rattling around loose. Underneath the thick blue cardstock piece labeled “Setup Guide” to the right:

are the two power supplies, along with…umm…the setup guide plus a support document:

Some shots of the wall wart follow:

including the specs:

and finally, our patient, as usual, accompanied by a 0.75″ (19.1 mm) diameter U.S. penny for size comparison purposes. Front view:

left side:

back, both an overview and a closeup of the various connectors: power, WAN, three LAN, and USB-A. Hmm…where have I seen that combo before?

right side:

top, complete with the status LED:

and…wait. What’s this?

More than one way to “skin a cat”

In addition to the always-informative K7S-03580 FCC ID, check out that MX4200C product name. When I saw it, I realized two key things:

• Linksys was playing a similar naming game to what they’d done with the VLP01. Quoting from my earlier teardown: “…an outer box shot of what I got…which, I’ve just noticed, claims that it’s an AC2400 configuration Read Original